29 Sep 2018

Less Is More #381 CASE card

Hi!
 
It's time for a new challenge at Less is More. Are you ready? Here is our cue card.
 

...and our fabulous sponsor, who has provided the card for us to case is Rebecca of Mellymoo Papercrafting.  This is the card she has given us to case

CASE CARD 


and here is the card I made:

I decided to simply reverse the colours on the sentiment and base card and turn the design into a Christmas card.

This was so simple and quick to make and it used very little supplies.

Simply die cut the sentiment 4 times and layer each one on top of each other. Cut the holly in gold card. As this is a die for cutting into a panel, rather than a full die cut, the parts of the holly are in separate pieces, so just piece bits together onto the card until you are happy with the outcome.
Add 3 green sequins with a read bead in the centre. Job done!

DIES: Sizzix Thinlets Mixed Media Christmas (Tim Holtz Alterations). Tonic Studios Cracker and Sentiment.
OTHER: Red, white and gold card 





Our fabulous guest designer is Joanna Manna who was our June prizewinner. You can see her gorgeous make, along with all the fantastic designs by the rest of the design team by going to the challenge blog .

LIM BLOG
LIM FACEBOOK PAGE
LIM INSTAGRAM

That's it from me for now. I hope you found something you like and I really hope to see you again soon.

Hugs,
Sharon xx

27 Sep 2018

Tick Tock


It's the turn of Alice and the White Rabbit to be showered with a little love and attention today.  I've not been in my craft room very much over the last 3 months as I've been travelling to and from the UK, and I've also had friends staying with me when I've been at home, so life has been a bit hectic. That means that these two fab Wonderland characters from Visible Image  have been waiting for me to colour them and use them on a card..... and I loved using them as they are so easy to colour.

You may also have noticed that I am posting Visible Image cards every Thursday now. The idea is (when things calm down a bit) that I intend to do one week as a CAS design and the next week as an inky design. Just to 'ring the changes' as they say.

So to today's inky card. This was a little more involved than my usual CAS designs.




On an 8" square piece of card, centre the stencil and faintly draw around the outside edge with a pencil. Mask off the outside border with masking tape, making sure you slightly overlap into the central section so that the unmasked area is inside the pencil lines.

Blend distress inks into the centre section. Randomly stamp the numbers, cogs and springs from the Somewhere In Time stamps set in picked raspberry, wilted violet and cracked pistachio distress inks and then dry the panel.

Secure the stencil over the top of the central section with masking tape and apply pearlescent dimensions paste. Carefully remove the stencil and all the masking, and let the panel dry completely. When completely dry, erase any pencil lines that are showing. Attach the whole 8" panel to an 8" square card blank.



Stamp the character images in memento ink and colour them with promarkers. I also used a couple of polychromos pencils for the rabbit 'fur'. Fussy cut the images and add them to the front of the card with foam pads.

Stamp the sentiment and mount this onto pink and black card before adding it to the front of the card.

Stamps Used:

(please click on the picture to be taken direct to the stamp set in the online store):
  https://visibleimage.com/product/alice-in-wonderland/      https://visibleimage.com/product/the-white-rabbit/

  https://visibleimage.com/product/somewhere-in-time/       https://visibleimage.com/product/tea-party/ 


Other Supplies:

Distress Inks (squeezed lemonade, picked raspberry, shaded lilac, peacock feathers, cracked pistachio). Sweet Poppy pearlescent dimensions paste, masking tape, pencil and eraser, Memento black ink, Promarkers (true blue, sky blue, artic blue, green, mint green, pastel green, burgundy, crimson, red, raw sienna, mustard, vanilla, primrose, coral, sunkissed pink, baby pink, blush). Polychromos pencils 151 helio-blue reddish, 199 black, 274 Warm Grey V), Versafine Onyx Black ink, White, pink and black card

Visible Image social media and other links (just click on the words in capital letters):

SHOP where the fantastic stamps are sold
BLOG with all the latest news and posts
FACEBOOK PAGE with info, inspiration and weekly giveaways
FACEBOOK GROUP come share your work with us and enter the monthly 'show and tell' challenges
INSTAGRAM
PINterest

Thanks for stopping by and I really hope to see you again soon.

Hugs,
Sharon xx

20 Sep 2018

A Touch

Hello there. I'm here today to share a card I made with some Visible Image stamps.

I wanted to make a subtle coloured and clean CAS look card with the gorgeous 'You Are Not Alone'  hands. These are available for pre-order at the moment in the Visible Image Shop

 

How to make this:

On a 14.5cm square piece of white card, stamp the dots pattern from  Set The Tone rotating and masking the card so that you get an even pattern. Stamp the word 'touch' several times randomly over the dotty area too, then doodle a border. Attach the panel to a pale blue card blank.

Stamp the hands in black ink using a stamping platform and leave the stamps in place on the stamp platform door. Colour the hands. Replace the coloured hands in the stamping platform and re-stamp with black ink and then heat emboss with black embossing powder. Stamp the sentiment too.

Take a postage stamp die and cut around the parts of the hands that you want to use, and around the sentiment too. Cut 10 more postage stamps out of the same blue card as the card blank. Layer up 4 of the blue die cuts underneath each of the hands and 2 blue die cuts under the sentiment, then fix them to the front of the card.

Stamps Used:

These stamps are available for pre-order until their release on 5th October.
(please click on the picture to be taken direct to the stamp set in the online store):
 https://visibleimage.com/product/you-are-not-alone/      https://visibleimage.com/product/set-the-tone/ 


Other Supplies:

Hunkydory Prism Ink (artcic mist), Versafine Onyx Black Ink, Promarker (cool aqua),  Polychromos Pencils (132 light flesh, 131 medium flesh, 130 dark flesh), Heat It Up! black embossing powder, Happy Little Stampers stitched postage stamps dies, white and blue card.

Visible Image social media and other links (just click on the words in capital letters):

SHOP where the fantastic stamps are sold
BLOG with all the latest news and posts
FACEBOOK PAGE with info, inspiration and weekly giveaways
FACEBOOK GROUP come share your work with us and enter the monthly 'show and tell' challenges
INSTAGRAM
PINterest

That's it from me for now. Thanks for stopping by and I really hope to see you again soon.

Hugs,
Sharon xx

15 Sep 2018

Less is More #380 - OLC Florals

Hello there! It's time for the dreaded one layer challenge at Less is More this week and the theme is florals. That's a nice easy one to do. I thought I'd make a card for my Mum....just because she is the best mother.


I simply got out  my Altenew layering stamps and stamped the image in Prism inks.

To add a look of layers I die cut a deckle edged rectangle, adhered it to the card with low tack tape (underneath) and blended tumbled glass distress ink out over the edges of the shape. The die cut was removed and the sentiment stamped in place. the final touch was some sparkle from Nuvo crystal drops in the centres of the flowers and dotted around them.

Easy Peasy.








STAMPS: Altenew Extra Special
DIES: Spellbinders Deckle Edge Rectangles
INKS: Hunkydory Prism Inks (midnight black, artic mist, blue lagoon, apple green, evergreen). Versafine onyx black (on the sentiment)
OTHER: White card, masking tape, Nuvo crystal drops

Here is our cue card:

 

our fab September sponsor is         
and they are offering this prize - plus LIM entrants get a 20% discount off their orders. Pop over to the challenge blog for the code and while you are there, feast your eyes on the glorious creations of the rest of the design team.

LIM BLOG
LIM FACEBOOK PAGE
LIM INSTAGRAM

That's it from me for now. Thanks for stopping by and I hope to see you again soon.

Hugs,
Sharon xx 

13 Sep 2018

Seeing Through The Mask

Hello there. Today I am sharing a card that I haven't blogged yet, but I made it back in January of this year for Visible Image stamps and Creative Stamping magazine. It appeared in Issue 55 of the Magazine.

I love making these octagonal shaped cards and many of the fantastic images and words by Visible Image suit this shape so well.

It seems rare that we see lots of bright colours on masculine cards so as the magazine provided us with a bright colour palette to use, I wanted to try to use every colour and keep a masculine look to the card too.  The geometry symbols in the Elemental stamp were something I thought would appeal to men.

The Maskerade sentiment is apt too because men often hid their pain and worry from everyone around them (this is very poignant for me at the moment as my father is terminally ill with only days left, and he has been hiding his pain) and the masks also represent that we don't always see what is under the surface. However, I wanted this card to be a happy card, so both of the masks are the smiling image from the set.




Here is how I made this card:
1. Using plain white card on the ScanNcut, weld two 145mm octagons together to make the card blank, then cut another 135mm octagon. Cut two more octagons from watercolour paper, one measuring 145mm and another measuring 130mm.

2. Working on the 130mm octagon of watercolour paper:
a) Heat emboss the two bubble shapes from the Create Your Calm set in a random pattern with clear ink and white embossing powder. TIPS: For a natural look, make sure some of the stamps overlap the edge. Work quickly and ‘chase’ the powder with the heat gun so that the powder doesn’t disappear into the paper.
b) TIP: As these colours make green when mixed, working with, and drying, the yellow and orange shades before adding the blues can help to minimise the mixing. Wet the paper where you want the colour to be. Add yellow and orange distress stains and dry with a heat gun. Spritz with a water spray when they are almost dry to create some water droplet marks. Re-wet the paper in the blank areas where you want colour and add blue distress inks. Dry with a heat gun and spritz with water when almost dry.
c) Stamp the Elemental design onto the inked area with faded jeans distress oxide. Add a little faded
jeans ink to the outside edges of the panel by wiping the edge along a blending tool.
d) Stamp the Maskerade sentiment into place as follows: On the stamp, mask off the words that you want to be in black, ink the sentiment in faded jeans distress oxide, remove the masking and stamp onto the panel. Clean the stamp. Mask off the blue words on the stamp, ink the sentiment in black ink, remove the masking and stamp onto the panel. TIP: It is best to use a stamping platform for this stage.
e) Using the Stars and Stripes stencil and pearlescent stencil paste, randomly add stars onto the inked area with a palette knife, making sure some overlap the edges. Smear a few extra pieces of the dimension paste very thinly in random areas to add to the shimmer. Leave this to dry for at least an hour, or overnight if possible. TIP: Wash your stencil in water immediately to avoid the paste sticking to it and ruining it.
f) When the panel is dry, mat it onto the 135mm white octagon.

3. Repeat step b. on the 145mm watercolour paper octagon to make the outside mat. Adhere this to the card blank.
4. Blend tumbled glass distress ink onto white card and stamp the smiling mask from the Maskerade set in faded jeans distress oxide.  Cut the mask out, then heat emboss it with ultra thick embossing crystals. Stamp the same mask in clear ink onto vellum and heat emboss with white embossing powder. Cut the mask out as close to the embossed line as possible.

5. Adhere the stamped panel to the outside mat with 3d foam. Adhere the vellum mask to the blue mask using red liner tape behind the white embossing. Adhere the blue mask to the card with 3d foam

Stamps Used:

(please click on the picture to be taken direct to the stamp set in the online store):
   https://visibleimage.com/product/maskerade/      https://visibleimage.com/product/elemental/ 

    https://visibleimage.com/product/create-your-calm/        https://visibleimage.com/product/stars-stripes/ 


Other Supplies:

 300gsm Watercolour Paper, White Card, Versamark Watermark Stamp Pad,  Distress Stains: broken china, faded jeans, spiced marmalade, mustard seed,  Distress Oxide ink: faded Jeans and broken china,  Distress Ink: tumbled glass,  Blending Tool and Blending Foam, Distress Sprayer, Wow! Opaque Bright White Super Fine Embossing Powder, Cosmic Shimmer Ultra Thick Embossing Crystals Clear, Sweet Poppy Stencil Dimensions Pearlescent Paste, Brother ScanNcut CM900, Misti Stamping Platform

I'd like to enter this card into:
Creative Moments #152 - Anything Goes
Crafting From The Heart #219 - Anything Goes
Simon Says Stamp Wednesday - Pop It Up
Through The Craft Room Door 11 September - Anything Goes
Through The Purple Haze September - Use Bright Colours
The Male Room #94 - Geometric (the shapes in the background and the card shape - I hope that qualifies)
The Paper Shelter #353 - Embossing of any kind (heat embossing on vellum)
The Corrosive Challenge #9 - Anything Goes

Visible Image social media and other links (just click on the words in capital letters):

SHOP where the fantastic stamps are sold
BLOG with all the latest news and posts
FACEBOOK PAGE with info, inspiration and weekly giveaways
FACEBOOK GROUP come share your work with us and enter the monthly 'show and tell' challenges
INSTAGRAM
PINterest

That's it from me for now. Thanks for stopping by and I really hope to see you again soon.

Hugs,
Sharon xx

6 Sep 2018

Treat Me

Hi! I'm back today with another quickie/CAS card made with some  Visible Image stamps.



To make the backing paper, repeat stamp the teapot from the Mad Hatter set onto white card. Colour the teapots with alcohol markers and add some random dots between the teapots too. Add glossy accents to the tiny skulls. Add this to a black card blank leaving a border at both sides.

Stamp, colour and fussy cut the cake from the Alice in Wonderland set and glitter the icing. Then stamp the 'treat me' sentiment from the Queen of Hearts set in white onto black card. Cut a wonky stitched panel for the top part of the card and add it to the card blank.  Attach the sentiment and cake with 3d foam, then add a few matching sequins.

Stamps Used:

(please click on the picture to be taken direct to the stamp set in the online store):
 https://visibleimage.com/product/the-mad-hatter/          https://visibleimage.com/product/alice-in-wonderland/ 

 
  https://visibleimage.com/product/the-queen-of-hearts/

Other Supplies:

Sugar Pea Designs build a card front, Memento Tuxedo Black ink, Versamark Clear ink, Promarkers (ivory, blush, dusky pink, cool grey 1,3 & 5, carmine and cerise), WOW! Opaque bright white embossing powder, sequins, black card, white card, glossy accents, 3dfoam pad.

Visible Image social media and other links (just click on the words in capital letters):

SHOP where the fantastic stamps are sold
BLOG with all the latest news and posts
FACEBOOK PAGE with info, inspiration and weekly giveaways
FACEBOOK GROUP come share your work with us and enter the monthly 'show and tell' challenges
INSTAGRAM
PINterest

That's it from me for now. Thanks for stopping by and I really hope to see you again soon.

Hugs,
Sharon xx

1 Sep 2018

Less Is More #379 - Black White plus one

Hello to you!  We have a new challenge over at Less is More and it is all about black, white and one other colour.


I chose to use gold-ish shades with my black and white and I used a couple of older stamp sets that haven't been inked up in a while.

The techniques I used were some ombre ink blending and emboss resist on the main panel. Everything is popped up on 3d foam for dimension and a little nuvo drops adds some textural interest. A nice and simple card to make.

This photo is taken in my light box so the colours look a little brighter. However, I've added another photo below to show the dimension and as that was taken in natural daylight, the colours in that one are more true to life.

STAMPS: Impression Obsession Flourishes, Clearly Besotted Dandelion Dreams
DIES: Tim Holtz Stitched Rectangles, Sugar Pea Designs build a card front
INKS: Versamark clear, Distress Inks (Mustard seed, fossilised amber)
OTHER: WOW! Opaque Bright White embossing powder, STAMPendous detail clear embossing powder, Nuvo crystal drops gloss ebony black, black and white card, 3d foam.



It's a new month today so we have a brand new sponsor for our September challenges

https://cas-ualfridaysstamps.com/products

As well as a prize, CAS-ual Fridays Stamps are also offering a 20% discount on orders for LIM participants - hop over to the challenge blog to find out the code to use.

While you are there, don't forget to take a peek at the fantastic inspiration from the rest of the design team.

And here is our LIM cue card




 

LIM BLOG
LIM FACEBOOK PAGE
LIM INSTAGRAM

That's it from me for now. I hope you found something you like and I really hope to see you again soon.

Hugs,
Sharon xx